BSC - Microbiology - Institute of Genetic Engineering
+91 (33) 2526 0051 / 52 / 53 / 60
Go to content
B.Sc in Microbiology
Duration : 6 Semesters (Three Years)
Total Marks = 3600

Eligibility : For admission in B.Sc, students from science stream with 10+2 (HS exam) or equivalent (ISC, CBSE etc.) examination having Physics / Chemistry / Biology / Mathematics (any two Science subject is compulsory) and pass mark in each subject will be eligible.

B.Sc Degree Course (Hons) in Microbiology

DURATION : Six Semesters (Three Years)
Total Marks = 3600

Theoretical Papers : 24 Papers (Marks = 2400)
Total Credit = 16 Credits per semester = 6 x 16 = 96

Practical / Project Papers : 12 papers (Marks = 1200)
Total Credit = 4 Credits per semester = 6 x 4 = 24

Total Credit in 6 Semesters = 96 + 24 = 120
4 credit (Theory) means 3 lecture hours & 1 Tutorial per week
or 42 lectures per semester per paper
2 credit (Lab.) means at least 40 hours of lab work per semester per paper
  1. In view of the increasing demand for training manpower in the area of Microbiology, Genetic Engineering and Biotechnology, it was consensus of the committee (Faculties & experts) that this course should be broad based and should be able to give a good insight into modern biology and important component of hands-on training to the students. Thus by nature it will be an interdisciplinary course.
  2. a) For admission, students from Science stream with 10+2 (HS exam) or equivalent, ISC, CBSE exam will be eligible.
    b) Admission will be through selection test CET (Common Entrance Examination) and also on the basis of the merit.
    c) The number of students for this course to be admitted this year will be 30.
  3. The fee structure should be on no grant basis as applicable to technical courses.

BSc : Microbiology (Hons) Syllabus

1st Semester - Paper (Theoretical) :
BSc Microbiology - 1st Semester - Paper (Theoretical)

1st Semester - Paper (Practical) :
BSc Microbiology - 1st Semester - Paper (Practical)
2nd Semester - Paper (Theoretical) :
BSc Microbiology - 2nd Semester - Paper (Theoretical)

2nd Semester - Paper (Practical) :
BSc Microbiology - 2nd Semester - Paper (Practical)
3rd Semester - Paper (Theoretical) :
BSc Microbiology - 3rd Semester - Paper (Theoretical)

3rd Semester - Paper (Practical) :
BSc Microbiology - 3rd Semester - Paper (Practical)
4th Semester - Paper (Theoretical) :
BSc Microbiology - 4th Semester - Paper (Theoretical)

4th Semester - Paper (Practical) :
BSc Microbiology - 4th Semester - Paper (Practical)
5th Semester - Paper (Theoretical) :
BSc Microbiology - 5th Semester - Paper (Theoretical)

5th Semester - Paper (Practical) :
BSc Microbiology - 5th Semester - Paper (Practical)
6th Semester - Paper (Theoretical) :
BSc Microbiology - 6th Semester - Paper (Theoretical)

6th Semester - Paper (Practical) :
BSc Microbiology - 6th Semester - Paper (Practical)

First Semester Syllabus

Paper Code : MSA –101 (Theoretical)      
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Macromolecular Structure & Analysis
Lecture period : 42L

  1. Carbohydrates : Structural aspects – Introduction & Occurrence, Classification of Mono-, Di- and Polysaccharides, Reducing & Non-reducing Sugars, Constitution of Glucose & Fructose, Osazone formation, Pyranose & Furanose forms, Determination of ring size, Inter-conversion of mono-saccharides. (4 Periods)
  2. Lipids : Structural aspects – General introduction, Classification & Structure of Simple & Compound lipids, Properties of Lipid aggregates (elementary idea), Biological membrane, Membrane protein – structural aspects, Lipoproteins (elementary idea). (4 Periods)
  3. Proteins : Structural aspects – General introduction, Classification & General characteristics, Structure of Primary, Secondary, Tertiary & Quaternary proteins (elementary idea), a- & b- chains of proteins (elementary idea), Classification of Amino acids. (5 Periods)
  4. Nucleic acid : Structural aspects – Components of DNA and RNA, Nucleosides & Nucleotides (introduction, structure & bonding), Double helical structure of DNA (Watson-Crick model), various forms of DNA. (5 Periods)
  5. Chemical & Enzymatic Kinetics - An introduction to enzyme; How enzyme works; Reaction rate; Thermodynamic definitions; Principles of catalytic power and specificity of enzymes; Enzyme kinetics – Approach to mechanism. (5 Periods)
  6. Genes are DNA – DNA is the genetic material, DNA is a double helix, DNA replication is semi-conservative, mutations change the sequence of DNA, a gene codes for a single polypeptide, recombination occurs by physical exchange of DNA, genetic code is triplet. (5 Periods)
  7. Mutation – Occurrence, kinds of Mutation, spontaneous & induced Mutation, Mutagens, detection of Mutation, Lethal Mutations, Biochemical Mutations, Phenotypic effects of Mutation, Molecular basis of Mutation, Significance & Practical applications of Mutation. (4 Periods)
  8. Expression of genetic information : from Transcription to Translation - The Relationship between genes and protein, The transcriptions : The basic process, Transcription and RNA Processing in Eukaryotic Cells, Encoding genetic information, Decoding the codons : the role of transfer RNAs. (5 Periods)
  9. Regulation of mRNA stability – capping, polyadenylation, pre-mRNA splicing, formation of commitment complex, creation of catalytic sites, trans-esterification reactions, mRNA surveillance. (5 Periods)

Paper Code : BPI -102 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Biophysics & Instrumentation
Lecture period : 42L

  1. General Biophysical methods – Measurement of pH, Radioactive labeling & counting, Autoradiography. (3 Periods)
  2. Separation & Identification of Materials - concept of Chromatography (Partition Chromatography, Paper Chromatography, Adsorption Chromatography, TLC, GLC, Ion Exchange Chromatography, Gel Chromatography, HPLC, Affinity Chromatography); Electrophoresis (Gel Electrophoresis, Paper Electrophoresis). (8 Periods)
  3. Centrifugation – Basic Principle of Centrifugation, Instrumentation of Ultracentrifuge (Preparative, Analytical), Factors affecting Sedimentation velocity, Standard Sedimentation Coefficient, Centrifugation of associating systems, Rate-Zonal centrifugation, sedimentation equilibrium Centrifugation. (5 Periods)
  4. Microscopy – Light microscopy, Bright & Dark Field microscopy, Fluorescence microscopy, Phase Contrast microscopy, TEM, SEM. (6 Periods)
  5. X-Ray Crystallography – X-ray diffraction, Bragg equation, Reciprocal lattice, Miller indices & Unit cell, Concept of different crystal structure, determination of crystal structure [concept of rotating crystal method, powder method]. (6 Periods)
  6. Spectroscopy: Raman Spectroscopy – What is Raman effect, Quantum mechanical reason of Raman effect, Molecular Polarizability, Polarizability ellipsoid, Experimental technique of Raman effect, Basic concept of Pure Rotational & Vibrational, Raman spectra of simple molecule (linear molecule). NMR Spectroscopy – Basic principle of NMR spectroscopy, Experimental technique & instrumentation, Chemical shift, Hyperfine splitting, Relaxation process. Absorption Spectroscopy – Simple theory of the absorption of light by molecules, Beer-Lambert law, Instrumentation for measuring the absorbance of visible light, Factors affecting the absorption properties of a Chromophore. (14 Periods)

Paper Code : CSD -103 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Cell Structure & Dynamics
Lecture period : 42L

  1. Origin of life on Earth - The theory of Extraterrestrial contact - import of life through meteorites. Theory of Chemical Evolution, Primitive Earth Conditions - anoxic reductive atmosphere, relatively high temperature, Volcanic eruption, radioactivity, high frequency UV radiation. Abiotic formation of sugars, amino acids, organic acids, purines, pyrimidines, glycerol and formation of nucleotides and their polymerization to RNA on reactive Surfaces, polymerization of amino acids to Polypeptides and Proteins. Ribozymes and RNA World. Formation of DNA, Formation of nucleoproteins, Prions, Natural Selection of Self replicating Polymers. (8 periods)
  2. Basics of Cell Biology (structure & function) – Discovery of cell and Cell Theory; Comparison between plant and animal cells; Cell wall; Plasma membrane; Modification of plasma membrane and intracellular junctions; Cytoskeleton; Protoplasm; Mitochondria; Chloroplast; ER; Golgi complex; Lysosome, endosome and microbodies; Ribosome; Centriole; Nucleus; Chemical components of a cell; Catalysis and use of energy by cells. (10 Periods)
  3. Biogenesis of Cellular organelles – Biosynthesis of mitochondria, chloroplast, ER, Golgi complex; Biosynthetic process in ER and golgi apparatus; Protein synthesis and folding in the cytoplasm; Degradation of cellular components. (6 Periods)
  4. Structure and function of Prokaryotic cell & its components - The Slime and the cell wall of bacteria containing peptidoglycan and related molecules; the outer membrane of Gram-negative bacteria, the cytoplasmic membrane. Water and ion transport, mesosomes, flagella, Pilus, fimbriae, ribosomes, carboxysomes, sulfur granules, glycogen, polyphosphate bodies, fat bodies, gas vesicles; endospores, exospores, cysts. Mycelia of fungi and Actinomycetes, Cytoskeleton filament, heterocysts and akinets of Cyanobacteria, Gliding and motility. (8 Periods)
  5. Membrane structure & transport – Models of membrane structure, Membrane lipids, proteins and carbohydrates; Solute transport by Simple diffusion, Facilitated diffusion and Active transport (6 Periods)
  6. Cell cycle - An overview of cell cycle; Components of cell cycle control system; Intracellular and Extra-cellular control of cell division, Programmed cell death (Apoptosis), intrinsic & extrinsic pathways of cell death, Apoptosis in relation with Cancer, Viral disease (AIDS) & Organ transplant. (4 Periods)

Paper Code : BMT-104 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Biomathematics
Lecture period : 42L

Classical Algebra

  1. Complex Number including D’Moivre’s Theorem, Logarithm (only algebra, without Series expansion), Binomial Theorem (without infinite series).
  2. Determinant, Matrix, Rank of Matrices by Diagonalisation method. (12 Periods)

Calculus – I [For functions of single variable]

  • Limit, Continuity, Differentiation (including differentiability), Successive Differentiation, Expansion of Functions – Rolle’s theorem, Mean Value theorem, Integration – Definite and Indefinite (ordinary, method of substitution, special trigonometric function, partial fraction) Application of integration to find area, Differential equations --homogeneous and Linear ODE’s and its simple applications to biological problems. (20 Periods)

Calculus – II [For functions of two variables]

  • Partial Differentiation including Euler’s theorem and it’s application. (10 Periods)

Paper Code : BMI –192 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Basic Microscopy & Instrumentation
Practical period : 40

  1. Microscopy – Light microscopy : principles, parts & function, Operation. (5 Periods)
  2. Image analysis of different classes of Microbes. (5 Periods)
  3. Preparation of Microbial media (bacteria, yeast, mold, algae, protozoa) (5 Periods)
  4. Sterilization: principles & operations – Autoclave, Hot Air Oven, Filtration, Laminar Air Flow (4 Periods)
  5. Principles & operations of Incubators & Shakers (4 Periods)
  6. Principle & operation of Centrifuge (4 Periods)
  7. Principle & operation of pH meter (3 Periods)
  8. Principle & operation of Colorimeter (3 Periods)
  9. Principle & operation of Spectrophotometer (3 Periods)
  10. Electrophoresis techniques (4 Periods)

Paper Code : BCH–191 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Biochemistry
Practical period : 40

  1. Estimation of protein by Folin Lowry method (3 Periods)
  2. Determination of Km and V max of amylase. (4 Periods)
  3. TLC separation of Amino acids /sugars (3 Periods)
  4. Determination of Iodine number of a fat (3 Periods)
  5. Estimation of RNA by Orcinol method (3 Periods)
  6. Estimation of DNA by diphenyl amine method (3 Periods)
  7. Verification of Beer’s Law Spectrophotometrically (4 Periods)
  8. Testing of Blood Sugar (3 Periods)
  9. Testing of Liver Function Test (Bilirubin, SGOT, SGPT, Alkaline Phosphatase, Albumin, Globulin, Total Protein) (8 Periods)
  10. Testing of Renal Function Test (Urea, Uric acid, Creatine, Creatinine) (6 Periods)

Second Semester Syllabus

Paper Code : OMB-201 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Organic Mechanisms in Biology
Lecture period : 42L

  1. Common Mechanisms in Biological Chemistry – Overview of Digestion, Absorption, Metabolism (Anabolism & Catabolism), Nutrition, Photosynthesis, Respiration, Excretion. (4 Periods)
  2. Biomolecules – Carbohydrates (Anomaric carbon, Mutarotation, Simple Chemical reactions of Glucose, Reducing & Non-reducing Sucrose, Maltose & Lactose, Elementary idea of structure of Starch & Cellulose); Proteins (Denaturation of proteins, Enzyme Kinetics), Nucleic acids (Mechanisms of Replication, Transcription & Protein synthesis, Genetic code); Hormones (classification, structural features & functions in bio-systems); Vitamins (classification, functions of vitamins in bio-systems). (10 Periods)
  3. Lipid Metabolism – Structures and roles of Fatty acids & Glycerols, beta oxidation of saturated fatty acids, oxidation of unsaturated fatty acids, oxidation of odd chain fatty acids, energy yield, ketone bodies. (6 Periods)
  4. Carbohydrate Metabolism – Aerobic & Anaerobic glycolysis, sequence of reactions in glycolysis, regulation in glycolysis, citric acid cycle, glycogenesis, glycogenolysis (sequence of reactions & regulation), Pentose-phosphate pathway (sequence of reactions & regulation), extraction of energy from food sources. (8 Periods)
  5. Amino acid Metabolism – Amino acid breakdown (amino acid deamination, Urea cycle, metabolic breakdown of individual amino acids – glucogenic & ketogenic amino acids), amino acids as biosynthetic precursors (haem biosynthesis & degradation, biosynthesis of epinephrine, dopamine, seretonin, GABA, histamin, glutathione); biosynthesis of essential & non-essential amino acids. (8 Periods)
  6. Nucleotide Metabolism – biosynthesis of purine & pyrimidine (de novo & salvage pathway); degradation of purine & pyrimidine. (6 Periods)

Paper Code : PTG-202 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Principles of Transmission Genetics
Lecture period : 42L

  1. Science of Genetics – an overview of modern history of Genetics before 1860, 1860-1900, 1900-1944, 1944-Present, about 3 general areas of Genetics (Classical, Molecular & Evolutionary). (3 Periods)
  2. Mendelism & Chromosome Theory – Mendel’s principles, applications of Mendel’s principles, Chromosome Theory of Heredity (Sutton-Boveri), Inheritance patterns, phenomenon of Dominance, Inheritance patterns in Human (Sex-linked, Autosomal, Mitochondrial, Unifactorial, Multi-factorial). (4 Periods)
  3. Extension of Mendelism – Deviation from Mendel’s Dihybrid phenotype, Linkage, Sutton’s view on linkage, Morgan’s view on linkage, Bateson & Punnet’s Coupling & Repulsion hypothesis. (2 Periods)
  4. Linkage & Crossing over - Chromosome theory of Linkage, kinds of linkage, linkage groups, types of Crossing over, mechanism of Meiotic Crossing over, kinds of Crossing over, theories about the mechanism of Crossing over, cytological detection of Crossing over, significance of Crossing over. (3 Periods)
  5. Allelic Variation & Gene function – Multiple allele, Genetic interaction, Epiststic interactions, Non-Epistatic inter-allelic genetic interactions, Atavism/Reversion, Penetrance (complete & incomplete), Expressivity, Pleiotropism, Modifier/Modifying genes. (3 Periods)
  6. Non-Mendelian inheritance – Evidences for Cytoplasmic factors, cytoplasmic inheritance, extra-nuclear inheritance (mitochondrial, chloroplast), non-chromosomal inheritance, maternal inheritance, uniparental inheritance. (3 Periods)
  7. Chromosomal variation in Number & Structure – Euploidy, Non-disjunction & Aneuploidy, Aneuploid segregation in plants, Aneuploidy in Human, Polyploidy in Plants & Animals, Induced Polyploidy, applications of Polyploidy, Chromosomal Mosaics, Polytene chromosome in Diptera, Deletion, Duplication, Inversion, Translocation, Position Effect, Centromeric & Non-centromeric breaks in chromosomes, chromosomal rearrangements in Human being, Chromosomal aberrations & evolution. (4 Periods)
  8. Chromosome Mapping - Haploid mapping (2 point & 3 point cross), Diploid mapping (Tetrad analysis), determination of linkage groups, determination of map distance, determination of gene order, cytological mapping. (4 Periods)
  9. Human Cyto-Genetics – Human karyotype, Banding techniques, classification, use of Human Cyto-genetics in Medical science, Chromosomal abnormalities in spontaneous abortions, viable monosomies & trisomies, chromosomal deletions & duplications, genetics of chromosomal inversions & translocations, human traits, Genomic position effects on Gene expression. (4 Periods)
  10. Pedigree analysis – Symbols of Pedigree, Pedigrees of Sex-linked & Autosomal (dominant & recessive), Mitochondrial, Incomplete dominance & Penetrance. (4 Periods)
  11. Formulating & Testing Genetic Hypothesis –problems of Sex-linkage, problems of genes with Multiple alleles, problems of gene interactions, Chi-square, t-test. (8 Periods)

Paper Code : POM -203 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Principles of Microbiology
Lecture period : 42L

  1. Overview of history of Microbiology - Biogenesis and abiogenesis Contributions of Redi, Spallanzani, Needham, Pasteur, Tyndal, Joseph Lister, Koch [Germ Theory], Edward Jenner and Flemming [Penicillin], Scope of Microbiology. (4 Periods)
  2. Classification of Microbes - Systems of classification, Numerical taxonomy, Identifying characters for classification, General properties and principles of classification of microorganisms Systematics of bacteria, Nutritional types [Definition and examples]. Classification on the basis of oxygen requirement. (6 Periods)
  3. Concept of Sterilization - Definition of sterilization, dry and moist heat, pasteurization, tyndalization; radiation, ultrasonication, filtration. Physical and Chemical methods of sterilization; disinfection sanitization, antisepsis sterilants and fumigation. Determination of phenol coefficient of disinfectant. (6 Periods)
  4. Stains and staining techniques – Definition of auxochrome , chromophores, dyes, Classification of stains, Theories of staining, Mechanism of gram staining, acid fast staining, negative staining, capsule staining, flagella staining, endospore staining. (6 Periods)
  5. Microbes in Extreme Environment – Nature, special features of the thermophilic, methanogenic and halophilic Archaea; photosynthetic bacteria, Cyanobacteria some Archaea who live in extreme conditions like cold, and space. (6 Periods)
  6. Pathogenic Microorganisms – List of common bacterial, fungal and viral diseases of human beings [Name of the disease, causative pathogen, parts affected] (4 Periods)
  7. Basic concepts of Virology - General characteristics of viruses, differences between bacteria and viruses. Classification of viruses Physical and chemical Structures of different Viruses on the basis of capsid symmetry - enveloped (Herpes virus), helical (TMV) and icosahedral (Polyoma viruses), Capsids, complex (Bacteriophage, and Virion size, enveloped (Herpes), helical (TMV) and icosahedral (Polyoma), Capsids. (10 Periods)

Paper Code : MGR-204 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Microbial Growth & Reproduction
Lecture period : 42L

  1. Basic concepts of Microbes : General characteristics and functions of Microbes, Physical and Chemical Structures of different Microbes, Importance of Cell shape cell size in rods and cocci, septum formation, cell elongation, brief outline of Microbial cell wall synthesis and cell separation, Bacterial Sporulation - Endospore formation in Bacillus, Occurrence of Ca-dipicolinate (DPA) and soluble Proteins (SASP), Spore germination (16 Periods)
  2. Kinetics of Bacterial growth: Different types of bacterial culture (Batch, Synchronous, Arithmatic) – Definition and brief description. Growth Phases, Growth Kinetcs, Calculation of duration of Phases and generation time, Growth yields, Methods of growth determination, Environmental factors affecting growth - temperature, pH, osmotic pressure and nutrient concentration per cell. (10 Periods)
  3. Microbial Reproduction : Different modes of Microbial DNA replication, Mechanism of DNA replication – rolling circle model & Theta structure-Bidirectional replication, Fats proteins, Divisomes, MreB Proteins, Impairment of proof reading in mutants, Mutant genes in bacteria, mutation frequency, Rate of mutation, Repair of UV-damage, Photoreactivation, Excision repair, SOS response. (10 Periods)
  4. Sexuality and bacterial recombination - Rarity in Bacteria, Male and femaleness in bacteria (F+, F’ and Hfr), Plasmids and pilus mediated transfer of genes in the conjugation process in E.coli, Homologous Recombination, Site specific Recombination (Holliday model) (14 Periods)

Paper Code : CGT–292 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Cytogenetics Techniques
Practical period : 40

  1. Basic sterilization techniques required for Media preparation & Cytological techniques (5 Periods)
  2. Media preparation technique (6 Periods)
  3. Culture of Human, Plant & Animal cells (8 Periods)
  4. Preparation of Slides (5 Periods)
  5. Staining of Slides (6 Periods)
  6. Image analysis & Karyotyping (10 Periods)

Paper Code : MIC–293 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Microbiology
Practical period : 40

  1. Sampling and quantification of microorganisms in air, soil and water. (6 Periods)
  2. Isolation of bacteria [Streak plate, spread plate, pour plate, serial dilution] (6 Periods)
  3. Identification of microorganisms from the habitats [simple staining, differential staining, acid fast staining, capsule staining, spore staining and motility] (6 Periods)
  4. Observation of morphology - shape and arrangement of cells. (6 Periods)
  5. Methods of inoculation of different microbes in selective media. (6 Periods)
  6. Microscopic measurements, micrometer (ocular and stage), haemocytometer. (6 Periods)
  7. Microscopic study of phytoplanktons & zooplanktons. (2 Periods)

Third Semester Syllabus

Paper Code : MCG -301 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Microbial Genetics
Lecture period : 42L

  1. Prokaryotic Genomes - Physical organization of bacterial genomes (Structure of the bacterial nucleoid, Replication and partitioning of the bacterial genome and Genome of Archaea). (4 Periods)
  2. Mechanism of genetic exchange : Plasmid and bacterial sex, Types of plasmids (F Plasmid : a Conjugate plasmid’, Mobilization of Non-conjugative plasmid, R plasmid, Col plasmid Copy number and incompatibility), Episomes. Transposable elements (Insertion sequence and transposons, Integrons and Antibiotic-Resistance cassettes, Multiple Antibiotic Resistant bacteria, Mu–virus); Bacterial Genetics (Mutant phenotype, DNA mediated Transformation; Conjugation (Cointegrate Formation and Hfr Cells, Time–of–Entry Mapping, F’ Plasmid); Transduction (Generalized transduction, Specialized Transduction)- gene mapping. (12 Periods)
  3. Molecular Mechanism of gene regulation in prokaryotes - Transcriptional regulation in prokaryotes (inducible and repressible system, positive regulation and negative regulation); Operon concept – lac, trp, Ara operons. (6 Periods)
  4. Bacteriophages: Stages in the Lytic Life Cycle of a typical phage, Properties of a phage infected bacterial culture, Specificity in phage infection, E. coli PhageT4, E.coli Phage T7, E.coli phage lambda, Immunity to infection, Prophage integration, Induction of prophage, Induction & Prophage excision, Repressor, Structure of the operator and binding of the repressor and the Cro product, Decision between the lytic and lysogenic Cycles, Transducing phages, E.coli phage phiX174, filamentous DNA phages, Single stranded RNA phages, The lysogenic Cycle. (15 Periods)
  5. Bacteriophage Genetics - Benzer’s fine structure of gene in bacteriophage T4 : Plaque Formation and Phage Mutants, Genetic recombition in the lytic cycle, (concept of recon, muton, cistron). (5 Periods)

Paper Code : POI -302 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Principles of Immunology
Lecture period : 42L

  1. Immune Response - an overview, components of mammalian immune system, molecular structure of Immunoglobulins or Antibodies, Humoral & Cellular immune responses, T-lymphocytes & immune response (cytotoxic T-cell, helper T-cell, suppressor T-cells), T-cell receptors, genome rearrangements during B-lymphocyte differentiation, Antibody affinity maturation class switching, assembly of T-cell receptor genes by somatic recombination. (8 Periods)
  2. Regulation of immunoglobulin gene expression – clonal selection theory, allotypes & idiotypes, allelic exclusion, immunologic memory, heavy chain gene transcription, genetic basis of antibody diversity, hypotheses (germ line & somatic mutation), antibody diversity, alternate pathways of transcript splicing, variable joining sites & somatic mutation, role of antibody (alone, in complement activation & with effector cells), monoclonal antibodies. (8 Periods)
  3. Major Histocompatibility complexes – class I & class II MHC antigens, antigen processing. (3 Periods)
  4. Immunity to infection – immunity to different organisms, pathogen defense strategies, avoidance of recognition, inactivation of host-immune effector mechanisms. (3 Periods)
  5. Immuno-techniques - Blood grouping, Antigen-Antibody reactions : agglutination, precipitation, immuno-electrophoresis, Coomb’s test, ELISA, RIA. (8 Periods)
  6. Vaccines & Vaccination – adjuvants, cytokines, DNA vaccines, recombinant vaccines, bacterial vaccines, viral vaccines, vaccines to other infectious agents, tumor vaccines, principles of vaccination, passive & active immunization, immunization programs & role of WHO in immunization programs. (5 Periods)
  7. Auto-immune diseases – autoimmunity & auto-immune diseases, factors contributing development of auto-immune diseases, mechanism of development, breakdown of self-tolerance, rejection of transplants, molecular mimicry, diagnosis & treatment of auto-immune diseases, replacement therapy, suppression of auto- immune processes, nature of auto-antigens, immunodeficiency, AIDS. (5 Periods)
  8. Immune Response of Plants. (2 Periods)

Paper Code : PAT-303 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Plant and Animal Tissue Culture Techniques and its application
Lecture period : 42L

  1. Introduction to Techniques - Introductory history, Laboratory organization, Media, Aseptic manipulation. (3 Periods)
  2. Basic concepts in cell culture - cell culture, Cellular Totipotency, Somatic Embryogenesis. (5 Periods)
  3. In vitro culture : approaches & methodologies - preparation steps for tissue culture, surface sterilization of plant tissue material, basic procedure for aseptic tissue transfer, incubation of culture. (5 Periods)
  4. Tissue nutrition : Growth Hormones - Plant cells (Composition of culture media, Growth hormones, Vitamins, Unidentified supplements, selection of media); Animal cells (substrate on which cells grow, Feeder layer on substrate, gas phase for tissue culture, media and supplements). (6 Periods)
  5. Tissue culture methodologies - Plant cells (Callus Culture, Cell Suspension Culture, Organ Micro-culture, plant micro-propagation, Somatic Embryogenesis); Animal cells (Source of tissue, primary culture, differentiation of cells, growth kinetics, animal cell lines and their origin and chracterization). (6 Periods)
  6. Cloning & Selection of specific cell types – cloning, somatic cell fusion and HAT selection, Medium suspension fusion, selection of Hybrid clone, production of monoclonal antibodies. (6 Periods)
  7. Organ Culture - Culture of embryonic organs, whole embryo culture, culture of adult organs. (7 Periods)

Paper Code : MDC-304 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Microbial Diversity & Classification
Lecture period : 42L

  1. Microbial Classification: Whittaker’s five kingdom classification of living system, (2 Periods)
  2. Archaebacteria : – Cell structure, metabolic character, function and reproduction of Methanogens, Halophiles, Tharmoacidophiles. (9 periods)
  3. Eubacteria : Cell morphology, function, reproduction and of
    1. a) Photosynthetic eubacteria (cyanobacteria).
    2. b) Gliding bacteria (Myxobacteria and Cytophaga group).
    3. c) Gram negative eubacteria (Spirochetes, Rickttsias, Chlamydias)
    4. d) Gram positive eubacteria (Actinomycetes).
    5. e) Spore forming bacteria (spore formation and germination),
    6. f) Fermentative bacteria – metabolic character,
    7. g) Sulfur bacteria and Nitrogen fixing bacteria
    8. h) The mollicutes. (16 periods)
  4. Brief description of eukaryotic Algae & Fungi and protozoa : General characteristics, vegetative & reproductive structure of the following groups of Microorganism particularly
  5. Algae Cyanophyta, Cholorophyta Bacillariophyta, Phacophyta, Rhodophyta
  6. Fungi Phycomycetis, Bacidiomycetis, Zygomyetes, Oomycets, Asomycetes, Deuteromycetes (imperfect and perfect stages) Protozoa Giardia, Entamoeba and Plasmodium) (10 periods)
  7. General Properties of other viruses, viroids and prions : Viroids, prions, Filamentous DNA phages, Single stranded RNA phages, Cauliflower Mosaic, Virus of Plants; HIV, Vaccinia and Simian virus of animals, Insect virus. (5 Periods)

Paper Code : IMN–392 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Immunology
Practical period : 40

  1. Antigen-Antibody reactions – Agglutination (Blood grouping testing). (6 Periods)
  2. Antibody titration (Ouchterlony Double Diffusion). (6 Periods)
  3. Antigen-Antibody reactions – Immuno-electrophoresis, Rocket immuno-electrophoresis. (10 Periods)
  4. Antigen-Antibody reactions – Coomb’s test. (8 Periods)
  5. Antigen-Antibody reactions – ELISA. (10 Periods)

Paper Code : TCT–393 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Tissue Culture Techniques
Practical period : 40

  1. In vitro Culture - Washing & Sterilization, Preparatory steps for tissue culture, surface sterilization of plant material, basic procedures for Aseptic tissue transfer, incubation of culture. (8 Periods)
  2. Preparation of Culture media & Reagents - Media composition, Nutrition, Hormones. (8 Periods)
  3. Tissue Culture – Callus culture, Cell suspension. (8 Periods)
  4. Organ Micro-culture - Shoot tip, excised root, Leaf culture. (8 Periods)
  5. Plant micro-propagation – micro-culture of plants. (8 Periods)

Fourth Semester Syllabus

Paper Code : MOG-401 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Molecular Genetics
Lecture period : 42L

  1. How to clone a gene - What is clone, Overview of the procedure, Gene library, Hybridization. (4 Periods)
  2. Purification and Separation of nucleic acids – Extraction and Purification of nucleic acids, Detection and Quantitation of Nucleic acids, Gel Electrophoresis. (8 Periods)
  3. Cutting and Joining DNA – Restriction Endonucleases, Ligation, Alkaline Phosphate, Double Digest, Modification of Restriction Fragments ends, Other Ways of joining DNA Molecules. (6 Periods)
  4. Vectors – Plasmid vectors, Vectors based on the lambda Bacteriophage, Cosmids, M13 vectors, Expression vectors, Vectors for cloning and expression in Eukaryotic cells, Super vectors : YACs and BACs. (8 Periods)
  5. Amplifying DNA : PCR and Cell based DNA Cloning – The importance of DNA Cloning, PCR : basic features and application, Principles of Cell-based DNA Cloning, Cloning System for amplifying different sized fragments, Cloning System for producing single-stranded and mutagenized DNA. (8 Periods)
  6. Nucleic Acid Hybridization : Principle and application - Preparation of nucleic probes, Principle of Nucleic acid hybridization, Nucleic acid hybridization assays, and microarrays. (8 Periods)

Paper Code : CBB-402 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Computational Biology & Bio-informatics
Lecture period : 42L

  1. Introduction to Genomics - information flow in biology, DNA sequence data, Experimental approach to genome sequence data, genome information resources. (8 Periods)
  2. Functional Proteomics - protein sequence and structural data, protein information resources and secondary data bases. (8 Periods)
  3. Computational Genomics - Internet basics, biological data analysis and application, sequence data bases, NCBI model, file format. (8 Periods)
  4. Sequence alignment & data base search - Protein primary sequence analysis, DNA sequence analysis, pair wise sequence alignment, FASTA algorithm, BLAST, multiple sequence alignment, DATA base searching using BLAST and FASTA. (10 Periods)
  5. Structural data bases - Small molecules data bases, protein information resources, protein data bank. (8 Periods)

Paper Code : BDT–403 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Biodiversity & Taxonomy
Lecture period : 42L

  1. Commercial Production of Microorganisms – Industrial Fermenters, Single-cell Protein. (6 Periods)
  2. Bioconversions – Biomining and bioleaching of ores (Use of thermophilic microorganisms in industrial microbiology Bio-gas, Bio-leaching, Bio-diesel. (10 Periods)
  3. Microorganisms & Agriculture – Microorganisms in Agricultural Waste water treatment, Vermiculture, Microbial pesticides. (6 Periods)
  4. Products from Microorganisms – Metabolites, Enzymes, Antibiotics. (6 Periods)
  5. Bioremediation – Petroleum prospecting and formation of oil spills,, Wastewater treatment, chemical degradation, heavy Metals. (6 Periods)
  6. Principles of Microbial growth – introduction, the ways of growing microorganisms, ways to increase yield of microbes, Batch, fed-batch and continuous cultures (definition and kinetics). (8 Periods)

Paper Code : MBT -404 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Microbial Biotechnology
Lecture period : 42L

  1. Principles of Developmental Biology - Genetic approaches, Genetic marking, Genetic malformations. (3 Periods)
  2. Developmental patterns – Developmental dynamics of cell specification (Autonomous, Syncytial & Conditional), Morphogenetic fields. (4 Periods)
  3. The Genetic core of development - The Embryological origins of Gene Theory, Early attempts at Developmental Genetics, Genomic equivalence, determining the function of genes during development, Gene targeting (Knockout) experiments, determining function of a message : Antisense RNA. (6 Periods)
  4. Genetics of cell-cell communication in development - JAK-STAT pathway, Hedgehog pathway, ‘Canonical’ WNT pathway, “non-Canonical” WNT pathway, SMAD pathway, cell death pathways, Juxtacrine signaling & Cell patterning. (6 Periods)
  5. Differential gene expression from the same nuclear repertoire – differential gene transcription, selective nuclear RNA processing, Selective mRNA translation, differential protein modification, DNA methylation & gene activity, chromatin modification induced by DNA methylation, dosage compensation, X-inactivation in Human female, miRNA in transcriptional gene regulation. (6 Periods)
  6. Environmental regulation of Animal development – Phenotypic plasticity, Environment – as part of normal development, Polyphenisms & Plasticity, environmentally adaptive nervous system, Endocrine disruptors. (4 Periods)
  7. Developmental mechanisms of Evolutionary change – ‘Unity of Type & ‘Conditions of Existence’, preconditions for Macroevolution through developmental change – Modularity & Molecular parsimony, mechanisms of macroevolutionary change, Homologous pathways of development, Developmental constraints (Physical, Morphogenetic & Phyletic). (4 Periods)
  8. Genetic analysis of developmental pathways in model organisms – Drosophila, C. elegans, Xenopus, Zebrafish, Chick & Mouse. (6 Periods)
  9. Genetics of Metamorphosis, Regeneration & Aging – Metamorphosis in Insects, Metamorphosis in Amphibia, Morphallactic Regeneration in Hydra, Epimorphic regeneration of Salamander limbs, Compensatory regeneration in the Mammalian Liver, Causes of Aging, Genetically regulated pathway of Aging. (5 Periods)
  10. Medical implications of Developmental Biology – Genetic errors of Human development, inborn errors of nuclear RNA processing & translation, identifying the genes for Human developmental anomalies, Teratogenesis – environmental assaults on Human development. (6 Periods)

Paper Code : MBT–491 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Molecular Biology Techniques
Practical period : 40

  1. DNA isolation - from Plant cell (leaf of cabbage / mustard), Animal cell (goat liver), Human Blood (Fresh / Stored / Frozen) & Microbes (12 Periods)
  2. Plasmid DNA isolation (6 Periods)
  3. Gel electrophoresis (10 Periods)
  4. Polymerase Chain Reaction (8 Periods)
  5. Gel documentation & photography (4 Periods)

Paper Code : BIN–492 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Bio-informatics
Practical period : 40

  1. Internet basics (10 Periods)
  2. Introduction to NCBI Web sites (15 Periods)
  3. Introduction to Data bases (15 Periods)

Fifth Semester Syllabus

Paper Code : DPB-501 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : DNA Typing, Proteomics & Beyond
Lecture period : 42L

  1. DNA Typing : DNA polymorphisms: the basis of DNA typing, Minisatellite analysis, Polymerase chain reaction based analysis, Short tandem repeat analysis, Mitochondrial DNA analysis, Y chromosome analysis, Randomly amplified polymorphic DNA (RAPD) analysis. (10 Periods)
  2. Proteomics and beyond : Analysis of the transcriptome, Proteomics-Expression analysis & Characterization of proteins, Metabolomics & global biochemical networks. (12 Periods)
  3. High-throughput analysis of gene function - DNA microarrays, Protein arrays, Mass spectrometry. (10 Periods)
  4. Single Nucleotide Polymorphisms - The nucleolar proteome, Mapping disease-associated SNPs : Alzheimer’s disease. (10 Periods)

Paper Code : RDT-502 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Recombinant DNA Technology
Lecture period : 42L

  1. Gene Recombination and Gene transfer : Bacterial Conjugation, Transformation, Transduction, Episomes, Plasmids, Microinjection, Electroporation, Microprojectile, Shot Gun method, Ultrasonication, Liposome fusion, Microlaser. (8 Periods)
  2. Changing genes: site-directed mutagenesis and Protein engineering: Primer extension is a simple method for site directed mutation, PCR based site directed mutagenesis, Random mutagenesis, Use of Phage display techniques to facilitate the selection of mutant peptides, Gene shuffling, production of chimeric proteins. (10 Periods)
  3. Genetic engineering in animals: Production of transgenic mice, ES cells can be used for gene targeting in mice, Applications of gene targeting, Using Yeast to study Eukaryotic gene function, Therapeutic products produced by genetic engineering-blood proteins, human hormones, immune modulators and vaccines, Transgenic animals, Production of proteins of Pharmaceutical value. (12 Periods)
  4. Genetic engineering in plants: Use of Agrobacterium tumefaciens and Arhizogenes, Ti plasmids, Strategies for gene transfer to plant cells, Direct DNA transfer to plants, Gene targeting in plants, Use of plant viruses as episomal expression vectors. (12 Periods)

Paper Code : EVB-503 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Environmental Biotechnology
Lecture period : 42L

  1. Components of Environment – Hydrosphere, lithosphere, atmosphere and biosphere – definitions with examples; Interaction of man and environment; Environmental Studies as a multidisciplinary subject. (4 periods)
  2. Global Environmental Problems – Green House Effect, Acid rain, El Nino, Ozone depletion, deforestation, desertification, salination, biodiversity loss; chemical and radiation hazards. (4 periods)
  3. Environmental pollution and degradation – Pollution of air, water and land with reference to their causes, nature of pollutions, impact and control strategies; noise pollution; environmental damage by agriculture, perspectives of pollution in urban, industrial and rural areas. Habitat Pollution by Chlorinated Hydrocarbons (DDT, PCBs, Dioxin etc), Organophosphates, Heavy Metals, Die-offs, Endocrine disrupting chemicals, Nutrient pollution. (10 periods)
  4. Environmental Management – Concept of health and sanitation, environmental diseases – infectious (water and air borne) and pollution related, spread and control of these diseases, health hazards due to pesticide and metal pollution, waste treatment, solid waste management, environmental standards and quality monitoring. (6 periods)
  5. Environmental Protection Act – Environmental Laws, national movements, sustainable development, environmental policies, environmental economics, environmental ethics – holistic approach of environmental protection and conservation, IUCN – role in environmental protection. Concept with reference to UN – declaration, aim and objectives of human right policies with reference to India, recent north-south debate on the priorities of implementation, Environmental Protection Agency (EPA). (10 periods)
  6. Bioremediation – Oil spills, Wastewater treatment, chemical degradation, heavy Metals. (8 periods)

Paper Code : INM-504 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Industrial Microbiology
Lecture period : 42L

  1. Bioreactor / Fermenter – types & operation of Bioreactors, physico-chemical standards used in bioreactors, limitations of bioreactors, stages of fermentation processes, Media design for fermentation processes, Solid substrate fermentation, Fermenters (Stirred tank, bubble columns, airlift. Bioreactors, Static, Submerged and agitated fermentation), advantages & disadvantages of solid substrate & liquid fermentations. (12 Periods)
  2. Technology of Microbial cell maintenance – steps to maintain microbial culture in an aseptic & sterile environment (how to inoculate, preserve & maintain), Strain preservation, maintenance and strain improvement by mutation of gene transfer processes (6 Periods)
  3. Downstream processing – extraction, separation, concentration, recovery & purification, operations (Insulin, Vitamins, Metabolites), Industrial production of Ethyl alcohol, Acetic Acid (Vinegar), Citric acid, lactic acid, a-amylase, protease penicillin, tetracycline and vitamin B12, with reference to easily available raw materials, Production of herbal drugs. . (8 Periods)
  4. Enzyme technology – nature of enzymes, application of enzymes, limitations of microbial cells used as catalysts in fermentation, multi-enzyme reactors, genetic engineering & protein engineering of enzymes, cloning strategy for enzymes, technology of enzyme production, use of immobilized cells and enzymes (Ca-alginate beads, polyacrylamide), industrial applications of immobilized enzymes. (8 Periods)
  5. Biological fuel generation – photosynthesis, sources of biomass, ethanol from biomass, methane from biomass, hydrogen, microbial recovery of petroleum. (4 Periods)
  6. Biotechnology in specific medical & industrial applications - Retting of jute, microbial process for immunization (Production of monoclonal antibodies), Deterioration of paper, textiles, painted surfaces and their prevention, Biofilms, microbial biopolymers, biosurfactants, Microbial culture selection with high yield potential. (4 Periods)

Paper Code : GET–591 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Genetic Engineering Techniques
Practical period : 40

  1. Transformation in E. coli DH5? (5 Periods)
  2. Bacterial conjugation (4 Periods)
  3. Phage Titration (5 Periods)
  4. Plasmid preparation (4 Periods)
  5. Restriction enzyme digestion (4 Periods)
  6. Ligation (4 Periods)
  7. Genomic DNA extraction (3 Periods)
  8. DNA molecular size determination (3 Periods)
  9. Bacterial Antibiotic sensitivity (4 Periods)
  10. Bacterial gene expression (using Lac promoter system) (4 Periods)

Paper Code : AMB–592 (Practical)
Full Marks : 100
Credit = 2
Paper Name : Applied Microbiology
Practical period : 40

  1. Preparation of Yoghurt.
  2. Citric acid production, its recovery and purification (lab scale)
  3. Isolation and enumeration of phosphate solubilising, cellulose decomposing and starch hydrolising bacteria from different habitats (plate count method).
  4. Determination of potability of water following MPN methods. Presumptive and confirmatory tests of coliforms.
  5. Isolation of symbiotic N2-fixing bacteria from root nodules from leguminous plants.
  6. Isolation of Auxotrophic / Antibiotic Resistant mutant by Induced mutagenesis in Bacteria by Replica plating technique.
  7. Preparation of Baker’s Yeast from molasses.

Sixth Semester Syllabus

Paper Code : MHG-601 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Lecture period : 42L
Paper Name : Model Organisms in Human Genome Project

  1. Genome – about genomes of model organisms (E. coli, Yeast, Arabidopsis thaliana, C. elegans, Drosophila melanogaster, laboratory mouse, Zebra fish, Human), types of genomes, genomes & genetic variation, comparison of different genomes, genome evolution. (8 Periods)
  2. Genomics – about the genomics, history, comparative genomics, comparative genomic hybridization, functional genomics. (5 Periods)
  3. Genome projects – an overview of genome projects of human and other model organisms of Human Genome Project. (5 Periods)
  4. Human Genome Project (HGP) – an overview of the project, goals of the project, major scientific strategies & approaches used in HGP, expected scientific & medical benefits of this project, about the organizations behind this project. (8 Periods)
  5. How Human genome was mapped – physical mapping, genetic mapping, gene ontology, gene annotation. (8 Periods)
  6. Technologies used in HGP – RFLP, microsatellite markers, STS, EST, DNA sequencing, DNA microarray. (8 Periods)

Paper Code : MDM -602 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Medical Microbiology
Lecture period : 42L

  1. Beneficial Microbial Interactions with Human : Normal microbial population of healthy human body - Skin, mouth, upper respiratory tract, intestinal tract, urino-genital tract, eye. (4 Periods)
  2. Harmful Microbial Interactions with Human : Entry of pathogens into the host, types of bacterial pathogens, Mechanism of bacterial pathogenicity, colonization and growth, Virulence, Virulence factors – exotoxins, enterotoxins, endotoxins, neurotoxins. – avoidance of host defense mechanisms, damage to host cell, Host factors for infection and innate resistance to infection. (8 Periods)
  3. General Account of Epidemiology : Principles of epidemiology, Current epidemics (AIDS,Nosocomical, Acute respiratory Syndrome,) Measures for prevention of epidemics –Global health consideration, Emerging and reemerging infectious diseases Biological warfare and biological weapons. (4 Periods)
  4. Person to person Microbial disease : Names of pathogen, disease symptoms, and preventive measures
    1. Airborne transmission of diseases by airborne pathogens Streptococcal diseases, Corynebacterium and Diptheria, Bordetella and Whooping cough, Mycobacterium-Leprosy and Tuberculosis, Nisseria meningitides meningitis and meningococcemia, Viruses and respiratory tract infection
    2. Direct contact transmission of diseases : Staphylococcus, Helicobactor pylori and Gastric ulcers, Hepatitis viruses
    3. Sexually transmitted diseases : Gonorrhea and syphilis, AIDS and HIV (12 Periods)
  5. Animal transmitted, Artropod transmitted , Soil borne and Water borne microbial diseases
    1. Rabies, Hantavirus pulmonary syndrome Artropod transmitted disease:
    2. Rickettsia, Malaria, Plague Soil borne diseases :
    3. Tetanus, Water borne microbial diseases: Cholera, Typhoid, Amoebiasis, Giardiasis,. (4 Periods)
  6. Chemical control of Pathogens – Definition and Classification of antibiotics on the basis of structure and mode of action. Assay of antibiotics, antibiotic spectrum Naturally produced drugs. Antibiotics produced by bacteria, actinomycetes and fungi used in chemotherapy. Semisynthetic antibiotic. Sulfa drugs their use and mechanism of action. Naldixic acid, nitrofurans, isonicotinic hydrazide, metronidazole; Prophylactic agents. Drug toxicity, Drug resistance – chromosomal mutation and plasmid-borne multiple drug resistance, cyclic polypeptide antibiotics of bacteria.

  • 10 Periods Paper Code : FAM-603 (Theoretical)
  • Full Marks : 100
  • Credit : 4 (3+1)
  • Paper Name : Food & Agricultural Microbiology
  • Lecture period : 42L

Food Microbiology

  1. Food Microbiology - Microbiology of milk, Cheese, Yogurt (curd), Idli, Kinema; Spoilage of food (fresh and cooked, canned food, Vegetables, fruits, fish, poultry product, meat and meat products, (8 Periods)
  2. A brief account on common food–borne infections and toxicoses - Salmonellosis, Botulism, Cholera, Mycotoxicosis, E.coli -poisoning. (4 Periods)
  3. A brief account on Food preservation – pasteurization, appertization, aseptic packaging; use of high temperatures, freezing, dehydration, ionizing radiation, osmotic pressure; use of chemicals - organic acids, esters, sulphur- dioxide, salts and high sugar concentration (sweets etc.) (8 Periods)

Agricultural Microbiology

  1. Nature of soil - Soil as microenvironment, Soil organic matters and humus, Soil and surface environment, Soil pores and movement of gases for microbial activity, Microbes in soil surface and different zones of soil. Decomposition of Plant and animal residues by microorganisms in soil. (8 Periods)
  2. Brief account of microbial interaction : Symbiosis, neutralism, Commensalism, Competition, Ammensalism, Synergism, Parasitism. (2 Periods)
  3. Microorganisms in the rhizosphere, root surfaces and phylloplane - Biofertilizers- Biological Nitrogen fixation- symbiotic and asymbiotic, mass production by Rhizobium, Azotobacter and Cyanobacteria i.e nitrosofying, nitrifying ammonifying and photosynthetic bacteria, Denitrification of nitrate fertilizers to N2 and N2O (a green house gas) by denitrifying bacteria. free living and in association with Azolla, Phosphate solubilizing bacteria. Soil anerobic methanogens in rice field. (8 Periods)
  4. Biological control of soil-borne microbial pathogens and nematodes - Microbial pesticides. Interaction of synthetic pesticides with soil microorganisms. Entomopathogenic fungi. (2 Periods)
  5. Plant diseases: Mode of entry of pathogens, disease symptoms, Brief account of algal disease, fungal disease,bacterial disease, viral disease, diseases caused by mycoplasmas and nematode Specially - brown spot of rice, black stem rust of wheat, stem rot of jute, rice disease by Tungo virus, grey blight of tea, red rot of sugarcane, TMV, Blast of rice, leaf blight of potato, Powdery mildew of cucurbit)- decimination and control measurement. (10 Periods)

Paper Code : MTL-604 (Theoretical)
Full Marks : 100
Credit : 4 (3+1)
Paper Name : Microbial Technology : Social, Legal & Ethical Issues
Lecture period : 42L

  1. An overview of Patient Statute : Title 35 Patents, requirement of a Patent disclosure, applications for Patent involving the action of microorganisms, Classification & Examination in the United States Patent & action of microorganisms, Statutory proposals, Patent & Trademark office guidelines. (12 Periods)
  2. Patent Practice & Problems : Review of case law, public & international depositories, patentability of microorganisms, Genetic engineering. (10 Periods)
  3. Social issues - public opinions against the microbial technologies. (10 Periods)
  4. Ethical issues – ethical issues against the microbial technologies. (10 Periods)

Paper Code : PRO–691 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Project on Biodiversity
Tour : 3-5 days (40 hrs)

A project work should be done individually or in a group under the guidance of one faculty of IGE on any topic related to the subject after one Educational tour to any place of India. The duration of tour will be at least 3-5 days at the spot depending upon the information/sample collection of project work. The work will be documented & also presented by the candidate in front of externals in a seminar.

Paper Code : DSS–692 (Practical)
Full Marks : 100
Credit : 2
Paper Name : Dissertation on Microbiology
Lab. work : 40 hrs

A project work should be done individually under the guidance of one faculty of IGE on any topic related to the subject & can be recorded as dissertation & also be presented by the candidate in front of externals in a seminar.
Institute of Genetic Engineering (IGE)
(India's Top College in the field of Biotechnology, Genetics, Microbiology, Molecular Biology with world class laboratory)
30, Thakurhat Road, Badu, Madhyamgram, Kolkata, West Bengal 700128.
+91 (33) 2526 0051 / 52 / 53 / 60
+91-9830426016 / 9831095960 / 9831117775
Website Designed by
Back to content